SKU: SMART.BPC-6kW
£1,900.00
In stock

6kW Single Phase (Suitable for property with 60A Main fuse)
Up to 10 years warranty. (Subject to TCs . The boiler requires registration and to be serviced every 2 years)
Wall-hung electric combi boiler with built-in smart controls
Instant combi + cylinder (Suitable for bath & shower)
Gives heating & instantaneous hot water up to 6lt/min at 65°C
Fully certified under IEC, IMQ, IECEE and Harmonics and Flicker
Eco & Comfort mode (Hot water)
Summer & Winter mode (Central Heating)
Compatible with solar panels
Fully double insulated
875 (H) x 450 (W) x 430 (D) (mm)
Also available in: 8kW, 12kW
The Elektra Essential Warranty Bundle includes:
1 x ELEKTRA EASY.BPC 6kW electric combi boiler
1 x Isolation Valve
1 x Rotary Isolator Switch
1 x Central Heating Filter Pack
1 x Inline Water treatment
The Elektra Complete Warranty Bundle includes:
Elektra Essential Warranty Bundle + Honeywell Wireless Thermostat
If the product is out of stock, you can place a backorder. The estimated delivery time for backorders is 4-8 weeks from the date the order is placed.
DOWNLOAD:
Buy the ELEKTRA EASY.BPC 6kW:
-
Checkout is handled securely by Electric Combi Boilers Company.


____________________________________________
All Parameters are the same for Elektra C & BP.
As BP has a built-in 37.5lts Cylinder that makes for better hot water delivery.
Elektra BP:
Has stored hot water over 50 litres at 60°C- 65°C ( 37.5 l in Cylinder 10-12 li in the central heating reservoir).
Factory setting flow rate needs to be set on installation. Recommended flow rate to be
Uses initially only 2kw to heat up the water in the cylinder and only uses more kW depending on the temperature rise needed and may go up to a full 12kw in time.
If you increase the flow rate from the recommended setting, in time the heat exchange balance will be lost and the temperature will decrease to below 38°C
Important facts to remember:
A. An average shower uses 21-25 litres of water. Elektra BP holds enough water and backs up the cylinder with a constant supply of hot water as per Elektra C for continuous delivery of Hot Water.
B. According to BS6700 a standard 1700 x 700 needs 100 litres of water @ 40°C. This is split into 60% HW and 40% CW.
The cold water mains pressure going into the boiler should be a maximum of 2 bar. If the pressure is more than 2 bar, install a pressure-reducing valve and set it between 1.5 - 2.0 bar pressure.
Graph (Hot water output):

____________________________________________
Based in London or Berkshire? You can also come to pick the boiler up in person from our Windsor office :
Electric Combi Boilers Company, Green Acres, Oakley Green Road, Windsor, SL4 4QF
For more information: Contact our Windsor branch on 01628 636 099